FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

4-92
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
l. Click Close to close the dialog box. The new firmware version
is downloaded and saved to the PC hard drive.
m. At the PC, close the Internet session.
n. Transfer the firmware version file from the PC to the rack-
mount management server by diskette, CD-ROM, or other
electronic means.
o. Go to step 5.
4. Insert the EFC Management Applications CD-ROM into the
CD-ROM drive of the management server.
5. At the management server’s Windows 2000 desktop, click Start at
the left side of the task bar, then select the Run option. The Run
dialog box displays (Figure 4-87).
Figure 4-87 Run Dialog Box
6. At the Run dialog box, type D:\mcdataServerInstall in the
Open field.
7. Click OK. A series of message boxes appear as the InstallAnywhere
third-party application prepares to install the SAN management
software, followed by the McDATA EFC Management Applications
dialog box (Figure 4-88 on page 4-93).