FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
4-85
— If the configured IP address (prior to reset) was not the same
as the default address, the switch-to-management server
Ethernet link drops and server communication is lost.
Continue to the next step.
8. To change the switch IP address and restart the management
server session, go to step 10.
9. To restart a management server session using the default IP
address of 10.1.1.10:
a. Close the Sphereon 4500 Element Manager application and
return to the SAN management application.
b. A grey square with a yellow exclamation mark appears
adjacent to the icon representing the reset switch, indicating
switch is not communicating with the management server.
c. At the SAN management application, select the Setup option
from the Discover menu. The Discover Setup dialog box
displays (Figure 4-77).
Figure 4-77 Discover Setup Dialog Box