FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

4-80
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Figure 4-69 Backup and Restore Configuration Dialog Box
4. Click Backup. An Information dialog box displays, indicating the
backup operation was initiated (Figure 4-70).
Figure 4-70 Information Dialog Box
5. Click OK to complete the backup operation and close the dialog
box.
Restore the
Configuration
To restore the switch configuration file from the management server
using the Sphereon 4500 Element Manager application:
1. Notify the customer the switch is to be set offline. Ensure the
customer’s system administrator quiesces Fibre Channel frame
traffic through the switch and sets attached FC-AL devices
offline.
2. Set the switch offline. For instructions, refer to Set the Switch
Online or Offline on page 4-48.
3. At the management server, open the SAN management
application (SANavigator 4.0 or EFCM 8.0).
4. At the SAN management application’s physical map, right-
click the product icon representing the switch for which a
configuration file is to be restored, then select Element Manager
from the pop-up menu. The application opens.