FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

4-66
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
12. Click Close to close the dialog box. The new firmware version is
downloaded and saved to the browser PC hard drive.
13. At the browser PC, close the Internet session.
Download a Firmware
Version to the Switch
To download a firmware version to the switch from the SANpilot
interface:
NOTE: When downloading a firmware version, follow all procedural
information contained in release notes or EC instructions that accompany the
firmware version. This information supplements information provided in
this general procedure.
1. When the SANpilot interface opens, the View panel and Switch
page appear as the default. At the View panel, select the Operations
option at the left side of the panel. The Operations panel opens
with the Switch page displayed.
2. Click the Maintenance and Firmware Upgrade tabs. The
Maintenance page displays with the Firmware Upgrade tab
selected (Figure 4-49).
Figure 4-49 Operations Panel (Maintenance Page with Firmware Upgrade Tab)