FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

4-60
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Determine Switch
Firmware Version
To determine a switch firmware version from the SANpilot interface:
1. When the SANpilot interface opens, the View panel and Switch
page appear as the default. At the View panel, click the Unit
Properties tab. The Unit Properties page displays (Figure 4-39).
Figure 4-39 View Panel (Unit Properties Page)
2. At the bottom of the page, record the firmware version listed in
the Firmware Level field.
Add a Firmware
Version to the Browser
PC Hard Drive
The firmware version shipped with the switch is provided on the
System Version XX.YY.ZZ CD-ROM. Subsequent firmware versions
for upgrading the switch are provided to customers through
McDATA’s Internet home page.
NOTE: When adding a firmware version, follow all procedural information
contained in release notes or engineering change (EC) instructions that
accompany the code. This information supplements information provided
in this general procedure.