FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

4-54
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Figure 4-36
Warning Dialog Box
6. Click OK. The dialog box closes and the following occur to
indicate the port is unblocked (and online):
— The emulated green LED associated with the port
illuminates at the Hardware View.
— The green LED associated with the port illuminates
at the switch.
— The check box adjacent to the Block Port menu option
becomes blank.
Clean Fiber-Optic Components
Perform this procedure as directed in this publication and when
connecting or disconnecting fiber-optic cables from port optical
transceivers (if necessary). To clean fiber-optic components:
1. Obtain the appropriate tools (portable can of oil-free compressed
air and alcohol pads) from the fiber-optic cleaning kit.
2. Disconnect the fiber-optic cable from the transceiver. Use
compressed air to blow any contaminants from the connector as
shown in part A of Figure 4-37.
Figure 4-37 Clean Fiber-Optic Components
A
B