FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
4-49
NOTE: When the switch is set offline, the operation of attached Fibre
Channel devices is disrupted. Do not set the switch offline unless directed to
do so by a procedural step or the next level of support.
Set Online State
(SANpilot Interface)
To set the switch online from the SANpilot interface:
1. When the SANpilot interface opens, the View panel and Switch
page appear as the default. At the View panel, select the Operations
option at the left side of the panel. The Operations panel opens
with the Switch page displayed.
2. Click the Online State tab. The Switch page displays with the
Online State tab selected (Figure 4-32).
Figure 4-32 Operations Panel (Switch Page with Online State Tab)
3. Click Set Online. The switch comes online and the message Your
changes have been successfully activated appears.
Set Offline State
(SANpilot Interface)
To set the switch offline from the SANpilot interface:
1. When the SANpilot interface opens, the View panel and Switch
page appear as the default. At the View panel, select the Operations
option at the left side of the panel. The Operations panel opens
with the Switch page displayed.