FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
4-39
3. Click the Port and Diagnostics tabs. The Port page displays with
the Diagnostics tab selected (Figure 4-25).
Figure 4-25 Operations Panel (Port Page with Diagnostics Tab)
4. Type the port number to be tested in the Targeted Port Number
field.
5. At the Diagnostics Test list box, select the Internal Loopback option.
6. Click Start Port Diagnostics. The test begins and:
a. The Start Port Diagnostics button changes to a Terminate Port
Diagnostics button.
b. The message Diagnostics Time Remaining: xx appears,
where xx are the seconds remaining in the test. The test takes
approximately 30 seconds.
NOTE: Click Terminate Port Diagnostics at any time to abort the
loopback test.
7. When the test completes, results appear as Passed or Failed in the
message area of the dialog box.