FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
4-23
Port List Page When the SANpilot interface opens, the View panel appears as the
default panel. At the View panel, select the Monitor option at the left
side of the panel. The Monitor panel opens with the Port List page
displayed (Figure 4-18).
Figure 4-18 Monitor Panel (Port List Page)
A row of information for each port (0 through 23 inclusive) appears.
Each row consists of the following columns:
• Port # - Switch port number.
• Name - Port name of 24 alphanumeric characters or less. The
name typically characterizes the device or fabric element to which
the port is attached.
• Block Configuration - Indicates if a port is blocked or unblocked.
Blocking a port prevents the attached devices or fabric element
from communicating. A blocked port continuously transmits the
offline sequence (OLS).
• State - Port state (Online, Offline, Not Installed, Inactive, Invalid
Attachment, Link Reset, No Light, Not Operational, Port Failure,
Segmented E_Port, or Te st i ng ).