FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
4-13
Figure 4-10 All Logs View
The All Logs listing provides the ability to view (display) all of the
content of the logs.
Clearing All Log
Entries
ATTENTION! Before clearing information in all of the logs, make sure the
logs are not needed for troubleshooting. Once the logs are cleared, the data
cannot be retrieved.
To clear all logs’ entries, select Monitor and select the Logs tab. Select
the Clear All Logs button, next to the All Logs link. A message
displays stating that the operation has been performed
SAN Management
Logs
To open a log from a SAN management application main window,
select the Logs option from the Monitor menu, then click (select) the
desired log option.
Audit Log To open the Audit Log, select the option from the Monitor and Logs
menus. The log displays a history of user actions performed through
the SAN management application. This information is useful for
system administrators and users. For a log description, refer to the
SANavigator Software Release 4.0 User Manual (621-000013).
Event Log To open the Event Log, select the option from the Monitor and Logs
menus. The log displays (Figure 4-11).