FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
4-7
Figure 4-4 Link Incident Log
The log consists of the following columns:
• Date/Time - Date and time the link incident occurred.
• Port - Port number (0 through 23) that reported the link incident.
• Event - Brief description of the link incident. Problem
descriptions include:
— Implicit incident.
— Bit-error threshold exceeded.
— Loss of signal or loss of synchronization.
— Not-operational primitive sequence received.
— Primitive sequence timeout.
— Invalid primitive sequence received for current link state.
Refer to MAP 0600: Port Failure and Link Incident Analysis on page 3-74
for corrective actions in response to these link incident messages.
Viewing the Security
Log
Select Monitor on the navigation panel. Select the Logs tab; the Logs
tab view displays. Select the Security Log link. The Security Log
displays in text format, as shown in Figure 4-5. The log displays in a
separate browser window. Close the browser window to close the
log.
The security log provides:
• Reason: The reason code for the security Event