FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

4-6
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Figure 4-3
Open Trunking Re-Route Log
The log consists of the following columns:
• Date/Time - Date and time the re-route action occurred.
• Receive Port - The switch port number (decimal) used for
receiving Fibre Channel traffic after the re-route action.
• Target Domain - The domain ID (decimal) of the target device to
which Fibre Channel traffic from the switch was rerouted.
• Old Exit Port - The switch port number (decimal) used for
transmitting Fibre Channel traffic before the re-route action.
• New Exit Port - The switch port number (decimal) used for
transmitting Fibre Channel traffic after the re-route action.
Link Incident Log The Link Incident Log (Figure 4-4 on page 4-7) displays Fibre Channel
link incident events recorded at the SANpilot interface. Entries reflect
the cause of the link incident. The log stores up to 200 entries, and the
most recent entry appears at the top of the log.