FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

3-114

McDATA Sphereon 4500 Fabric Switch Installation and Service Manual

4. Ignore the message. After ten seconds, the server performs

the boot sequence from BIOS. During the boot sequence, the

server performs additional POSTs and displays the following

operational information at the LCD panel:

•Host name.

• System date and time.

• LAN 1 and LAN 2 IP addresses.

• Fan 1, fan 2, fan 3, and fan 4 rotational speed.

• CPU temperature.

• Hard disk capacity.

• Virtual and physical memory capacity.

d. After successful POST completion, the LCD panel displays a

Welcome!! message, then continuously cycles through and

displays server operational information.

Did POSTs detect a problem?

NO YES

↓ A computer hardware problem exists. Refer to the supporting

documentation shipped with the server for instructions on

resolving the problem. Exit MAP.

After rebooting the server at the LCD panel, log on to the

management server’s Windows 2000 desktop through a LAN

connection to a browser-capable PC. Refer to Access the

Management Server Desktop on page 2-55 for instructions.The SAN

management application starts and the SANavigator Log In or EFCM