FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
3-101
g. Set both switches online. Refer to Set the Switch Online or
Offline on page 4-48.
Did the operating parameter change solve the problem and did both
switches join through the ISL to form a fabric?
NO YES
↓ The switch, associated ISL, and multiswitch fabric appear
operational. Exit MAP.
Contact the next level of support. Exit MAP.
16
A switch E_Port segmented because two fabric elements had
duplicate domain IDs.
a. Work with the system administrator to determine the desired
domain ID (1 through 31 inclusive) for each switch.
b. Notify the customer both switches will be set offline. Ensure the
system administrator quiesces Fibre Channel frame traffic
through the switches and sets attached devices offline.
c. Set both switches offline. Refer to Set the Switch Online or
Offline on page 4-48.
d. At the Hardware View (Figure 3-10 on page 3-20) for the first
switch reporting the problem, click Configure and select
Operating Parameters and Switch Parameters. The Configure
Switch Parameters dialog box displays (Figure 3-41).
Figure 3-41 Configure Switch Parameters Dialog Box