FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

3-94
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
1
Was an event code 011, 021, 051, 052, 061, 062, 063, 070, 071,
072, 140, 142, or 150 observed at the SANpilot event log or at the
Sphereon 4500 Event Log (management server)?
YES NO
↓ Go to step 3.
2
Table 3-13 lists event codes, brief explanations of the codes, and
associated steps that describe fault isolation procedures.
Table 3-13 MAP 700 Event Codes
Event
Code
Explanation Action
011 Login Server database invalid. Go to step 9.
021 Name Server database invalid. Go to step 9.
051 Management Server database invalid. Go to step 10.
052 Management Server internal error. Go to step 10.
061 Fabric Controller database invalid. Go to step 11.
062 Maximum interswitch hop count exceeded. Go to step 12.
063 Remote switch has too many ISLs. Go to step 13.
070 E_Port is segmented. Go to step 14.
071 Switch is isolated. Go to step 14.
072 E_Port connected to unsupported switch. Go to step 22.
140 Congestion detected on an ISL. Go to step 23.
142 Low BB_Credit detected on an ISL. Go to step 24.
150 Zone merge failure. Go to step 25.