FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
3-89
b. At the Fabric List section, ensure the Enable/Disable checkbox
is enabled (checked) for the fabric containing both switches.
c. At the Membership List of <Fabric Name> section, update
the membership list for both elements to ensure interswitch
compatibility, then click OK. The fabric binding feature is
consistently enabled for both switches.
Did updating the fabric membership lists solve the problem?
NO YES
↓ The switch appears operational. Exit MAP.
Contact the next level of support. Exit MAP.
31
A port connection is not allowed because of a switch binding
mismatch. Switch membership lists must be compatible for both
fabric elements.
a. At the Hardware View (Figure 3-10 on page 3-20) for each
switch, click Configure and select Switch Binding and Edit
Membership List. The Switch Binding - Membership List dialog
box displays (Figure 3-38).
Figure 3-38 Switch Binding - Membership List Dialog Box