FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Diagnostics
3-87
Did service of the HBAs solve the problem?
NO YES
↓ Exit MAP.
Contact the next level of support. Exit MAP.
29
A port connection is not allowed because of an Exchange Security
Attribute (ESA) feature mismatch. Switch binding parameters must be
compatible for both fabric elements.
a. At the Hardware View (Figure 3-10 on page 3-20) for each
switch, click Configure and select Switch Binding and Change
State. The Switch Binding - State Change dialog box displays
(Figure 3-36).
Figure 3-36 Switch Binding - State Change Dialog Box
b. Ensure the Enable Switch Binding checkbox is enabled
(checked) for both switches.