FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

3-66
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Figure 3-32
Domain Information Dialog Box (IP Address Page)
d. Type the correct switch IP address in the IP Address field.
e. Click OK to save the new IP address, close the dialog box, and
redefine the switch to the SAN management application.
f. Click OK to close the Discover Setup dialog box and return to the
SAN management application.
At the SAN management application master log, did the IP address
associated with the switch change to the new entry and did the
Ethernet connection recover?
NO YES
↓ The switch-to-server connection is restored and appears
operational. Exit MAP.
Contact the next level of support. Exit MAP.
26
An incorrect product type is defined to the management server or
customer-supplied server.
a. Right-click the product icon with a grey square and yellow
exclamation mark (representing the switch reporting the
problem) at the SAN management application’s physical map.
A pop-up menu appears.