FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

3-60
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
b. After a few seconds, the LCD panel displays the following
(Figure 3-23):
Figure 3-23 LCD Panel (LAN 2 IP Address)
c. Depending on switch-to-server LAN connectivity, record the
appropriate IP address (LAN 1 or LAN 2).
Continue to the next step.
23
Configure the management server or customer-supplied server
reporting the Duplicate Session communication problem as a client.
a. At the SANavigator or EFCM main window, select Logout from
the SAN menu. The application logs out and the SANavigator
Log In or EFCM Log In dialog box displays (Figure 3-21 on
page 3-50).
b. Type a user ID and password (obtained in MAP 0000: Start
MAP, and both are case sensitive).
c. Type the IP address of the management server or customer-
supplied server running the first instance of the SAN
management application in the Network Address field.
d. Click Login. The SAN management application opens and the
SANavigator or EFCM main window displays (Figure 3-9 on
page 3-17).
Did the management server or customer-supplied server reconfigure
as a client and did the Ethernet connection recover?
NO YES
↓ The switch-to-server connection is restored and the second
management server or customer-supplied server appears
operational as a client. Exit MAP.
Contact the next level of support. Exit MAP.
LAN 2:
010.001.001.001