FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

3-28
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Was unit beaconing enabled because switch failure or degradation
was suspected?
YES NO
↓ The switch appears operational. Exit MAP.
Go to step 39 and perform fault isolation again (at the switch).
47
Is the amber ERR LED at the switch front bezel illuminated?
YES NO
↓ The switch appears operational. Verify switch operation at the
management server or customer-supplied server running the
EFCM Lite application. Go to step 20.
48
Check FRUs for failure symptoms.
Are any amber LEDs associated with Fibre Channel ports
illuminated?
NO YES
↓ A Fibre Channel port failure is indicated. Go to step 38 to
obtain event codes. If no event codes are found, go to MAP
0600: Port Failure and Link Incident Analysis on page 3-74.
Exit MAP.
49
Is the amber ERR LED at the front of the switch illuminated?
NO YES
↓ A FRU failure or link incident is indicated. Go to step 38 to
obtain event codes that identify the failure. Exit MAP.
50
Is the amber LED on a power supply illuminated?
NO YES
↓ A power supply failure is indicated. Go to step 38 to obtain
event codes. If no event codes are found, go to MAP 0100:
Power Distribution Analysis on page 3-30. Exit MAP.
The switch appears operational. Exit MAP.