FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

xx
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Chapter 3, Diagnostics - This chapter describes maintenance
analysis procedures (MAPs) to fault isolate a switch problem to
an individual FRU.
Chapter 4, Repair Information - This chapter describes
supplementary diagnostic and repair procedures for a failed
switch. The chapter includes procedures to display and use log
information, perform port diagnostics, manage configuration
data, collect maintenance data, power-on, power-off, and reset
the switch, set the switch online or offline, block ports, manage
switch firmware, clean fiber optics, and install or upgrade
management server software.
Chapter 5, FRU Removal and Replacement - This chapter describes
procedures to remove and replace switch FRUs.
Chapter 6, Illustrated Parts Breakdown - This chapter illustrates,
describes, and shows the location of switch FRUs. In addition,
switch FRUs are cross-referenced to corresponding part numbers.
Appendix A, Messages - This appendix provides a list of user
and error messages that appear at the Sphereon 4500 Element
Manager application at the management server. A description of
each message and a recommended course of action in response to
the message are also provided.
Appendix B, Event Code Tables - This appendix provides an
explanation of event codes that appear at the SANpilot interface
or Sphereon 4500 Element Manager application. The event
severity and a recommended course of action in response to each
event are also provided.
Appendix C, Restore Management Server - This appendix provides
the instructions to restore all required switch applications to the
management server in case of a hard drive failure.
Appendix D, Consolidating Management Servers - This appendix
provides the instructions consolidate operation and network
addressing of multiple management servers.
An Index is also provided.
Related Publications Other publications that provide additional information about the
switch include:
• McDATA Products in a SAN Environment - Planning Manual
(620-000124).