FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

3-12
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
15
Repeat step 11 through step 14 for each remaining Fibre Channel
port for which a problem is suspected (ports 0 through 23).
Is a problem indicated for any of the ports?
NO YES
↓ Go to step 18 to obtain event codes. If no event codes are
found, go to MAP 0600: Port Failure and Link Incident
Analysis on page 3-74. Exit MAP.
16
Inspect power supply operational states.
a. At the View panel, click the FRU Properties tab. The View panel
(FRU Properties tab) displays (Figure 3-4).
Figure 3-4 View Panel (FRU Properties Tab)
b. Inspect the Status fields for both power supplies.
Does the Status field display a Failed message for either power
supply?
NO YES
↓ A power supply failure is indicated. Go to step 18 to obtain
event codes. If no event codes are found, go to MAP 0100:
Power Distribution Analysis on page 3-30. Exit MAP.