FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

3-2
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Quick Start
Table 3-2 lists and summarizes the MAPs. Fault isolation normally
begins at MAP 0000: Start MAP on page 3-6.
Table 3-3 on page 3-3 lists event codes and the corresponding MAP
references. The table provides a quick start guide if an event code is
readily available.
Table 3-1 Factory-Set Defaults
Item Default
Customer password password
Maintenance password level-2
IP address 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0
Table 3-2 MAP Summary
MAP Page
MAP 0000: Start MAP 3-6
MAP 0100: Power Distribution Analysis 3-30
MAP 0200: POST Failure Analysis 3-38
MAP 0300: Server Application Problem Determination 3-41
MAP 0400: Loss of Server Communication 3-51
MAP 0500: FRU Failure Analysis 3-68
MAP 0600: Port Failure and Link Incident Analysis 3-74
MAP 0700: Fabric, ISL, and Segmented Port Problem Determination 3-93
MAP 0800: Server Hardware Problem Determination 3-110