FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
Installation Tasks
2-123
Installation Tasks
4. To add devices (members) to the zone, click the zone name
(Zone-1). The Zoning page displays with the Modify Zone tab
selected (Figure 2-111).
Figure 2-111 Configure Panel (Zoning Page with Modify Zone Tab)
5. To rename a configured zone, type the new name in the Zone field
and click Rename Zone. After the name is validated, the zone name
is changed.
6. Add or delete zone members as follows:
• Add member by attached node WWN - Select the WWN of an
attached device (node) from the Attached Node World Wide
Name drop-down list and click the adjacent Add Member
button. The device is added to the zone.
• Add member by WWN - Type the WWN of an attached
device in the World Wide Name field and click the adjacent Add
Member button. The device is added to the zone.