FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
Installation Tasks
2-109
Installation Tasks
Figure 2-99 New Threshold Alert Dialog Box (Screen 4)
12. Click Finish. The Configure Threshold Alerts dialog box reappears
(Figure 2-95 on page 2-105) listing the name, type, and state of the
alert configured.
13. To activate the alert, highlight (select) the alert and click Activate.
Configure
OpenTrunking
Perform this procedure to configure OpenTrunking parameters. The
OpenTrunking feature must be installed to access this control. Refer
to Task 16: Configure PFE Key (Optional) on page 2-82 for instructions.
To configure OpenTrunking parameters:
1. Ensure the switch is online. For instructions, refer to Set the Switch
Online or Offline on page 4-48.
2. At the Hardware View, select OpenTrunking from the Configure
menu. The Configure OpenTrunking dialog box displays
(Figure 2-100 on page 2-110).