FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
2-108
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Installation Tasks
Figure 2-98 New Threshold Alert Dialog Box (Screen 3)
10. Select the Port Type or Port List radio button.
•Select Port Type radio button, then the E_Ports, F_Ports, or
FL_Ports radio button to cause an alert to generate for all ports
configured as either E_Ports, F_Ports, or FL_Ports.
•Select Port List to configure individual ports by clicking the
check box adjacent to each port number. Select Set All Ports to
place a check mark adjacent to all port numbers. Select Clear
All Ports to clear the check marks by port numbers.
11. Click Next. The New Threshold Alert dialog box (screen4) displays
(Figure 2-99 on page 2-109). This screen appears to provide a
summary of the alert configuration. To make changes, move back
and forth through the configuration screens by selecting Previous
or Next.