FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
2-100
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Installation Tasks
3. If nicknames are configured (through the SAN management
application) and are to be displayed instead of WWNs, click
Display Options. The Display Options dialog box displays
(Figure 2-91). If nicknames are not configured, go to step 5.
Figure 2-91 Display Options Dialog Box
4. Click the Nickname radio button, then click OK. The dialog box
closes and nicknames appear in the Switch Binding - Membership
List dialog box.
5. Perform one of the following:
• To allow a switch port connection to a device listed in the Node
List Panel, select the WWN or nickname and click Add>>. The
device WWN or nickname moves to the Switch Membership List
panel.
• To prohibit a switch port connection to a device listed in the
Switch Membership List Panel, select the WWN or nickname
and click <<Remove. The device WWN or nickname moves to
the Node List panel.
NOTE: Device connectivity and membership list edits are subject to
the rules defined under Online State and Switch Binding on page 2-96.
6. To add a WWN or nickname for a device not connected to the
switch, click Detached Node. The Add Detached Node dialog box
displays (Figure 2-92 on page 2-101).