FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Installation Tasks

2-99

Installation Tasks

• Restrict All Ports - Select this button to restrict connections

from specific devices to switch F_Ports or FL_Ports and fabric

elements to switch E_Ports. WWNs can be added to the

membership list to allow connection and removed from the

list to prohibit connection.

5. Click Activate to enable the changes and close the Switch Binding -

Change State dialog box.

Edit Membership List Perform this procedure to edit the switch binding membership list:

1. Ensure the SANtegrity binding PFE key is installed and

configured. For instructions, refer to Task 16: Configure PFE Key

(Optional) on page 2-82.

2. At the Hardware View, select Switch Binding, then Edit Membership

List from the Configure menu. The Switch Binding - Membership List

dialog box displays (Figure 2-90). WWNs of devices that are

allowed to connect to switch ports appear in the Switch

Membership List panel.

Figure 2-90 Switch Binding - Membership List Dialog Box