FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Installation Tasks

2-95

Installation Tasks

Figure 2-87 Configure Preferred Paths Dialog Box

2. Click Add. The Add Preferred Path dialog box displays

(Figure 2-88).

Figure 2-88 Add Preferred Path Dialog Box

3. At the Source Port field, type a value between 0 through 23. For

this switch, the value uniquely identifies the starting port for the

preferred path.

4. At the Exit Port field, type a value between 0 through 23. For

this switch, the value uniquely identifies the exit port for the

preferred path.

5. At the Destination Domain ID field, type a value between 1

through 31. This value uniquely identifies the destination director

or switch in the path.

6. Click OK to close the Add Preferred Path dialog box and add the

path to the list at the Configure Preferred Paths dialog box.