FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
Installation Tasks
2-87
Installation Tasks
1. At the Hardware View, select Date/Time from the Configure menu.
The Configure Date and Time dialog box displays (Figure 2-82).
Figure 2-82 Configure Date and Time Dialog Box
The switch date and time can be set manually, or set to be
periodically updated by the SAN management application (the
switch and application synchronize at least once daily).
2. To set the switch date and time manually:
a. Click the Periodic Date/Time Synchronization check box to
deselect the option (no check mark in the box). The greyed
out Date and Time fields activate.
b. Click the Date fields that require change, and type numbers in
the following ranges:
•Month (MM): 1 through 12.
•Day (DD): 1 through 31.
•Year (YYYY): greater than 1980.
c. Click the Time fields that require change, and type numbers in
the following ranges:
•Hour (HH): 0 through 23.
•Minute (MM): 0 through 59.
•Second (SS): 0 through 59.
d. Click Activate to set the switch date and time and close the
Configure Date and Time dialog box.