FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
2-84
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Installation Tasks
Features are enabled through a PFE key that is encoded to work with
the serial number of a unique switch. A key is a case- sensitive
alphanumeric string with dashes every four characters. To configure
the PFE key:
1. Ensure the switch is set offline. For instructions, refer to Set the
Switch Online or Offline on page 4-48.
2. At the Hardware View, click Configure at top of the view and select
Features from the pop-up menu. The Configure Feature Key dialog
box displays (Figure 2-78).
Figure 2-78 Configure Feature Key Dialog Box
3. Click New. The New Feature Key dialog box displays (Figure 2-79).
Figure 2-79 New Feature Key Dialog Box
4. Type the PFE key (case-sensitive xxxx-xxxx-xxxx-xx format) and
click OK. The Enable Feature Key dialog box displays (Figure 2-80
on page 2-85).