FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
Installation Tasks
2-81
Installation Tasks
3. Select the Element Manager option from the pop-up menu. When
the Element Manager application opens, the last view (tab)
accessed by a user opens by default. As an example, the Hardware
View (Figure 2-75) is shown.
Figure 2-75 Hardware View
4. Inspect switch status at the Hardware view and perform one of the
following steps:
• If the switch appears operational (no FRU alert symbols and a
green circle at the status bar), go to Task 16: Configure PFE Key
(Optional) on page 2-82.
• If switch operation appears degraded or a switch failure is
indicated (FRU alert symbols and a yellow triangle or red
diamond on the status bar), go to MAP 0000: Start MAP on
page 3-6 to isolate the problem.