FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
2-70
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Installation Tasks
NOTE: The Time Zone field must be set before the Date & Time field.
3. Click the Time Zone tab. The Date/Time Properties dialog box
displays with the Time Zone page open (Figure 2-66).
Figure 2-66 Date/Time Properties Dialog Box (Time Zone Tab)
4. To change the time zone:
a. Select the appropriate time zone from the drop-down list at
the top of the dialog box.
b. If instructed by the customer’s system administrator, select the
Automatically adjust clock for daylight saving changes check box.
c. Click Apply. Record time zone and daylight savings
information for reference if the management server hard drive
fails and must be restored.
5. Click the Date & Time tab. The Date/Time Properties dialog box
displays with the Date & Time page open.
6. To change the date and time:
a. Select the month from the drop-down list under Date.
b. Click the up or down arrow adjacent to the year field and
select the desired year.
c. Click the day on the calendar to select the desired date.