FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
2-54
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Installation Tasks
Configure Public
LAN Addresses
(Optional)
To optionally configure TCP/IP network information for the public
LAN connection (LAN 1):
1. At the management server’s LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following (Figure 2-41):
Figure 2-41 LCD Panel (Password Entry)
2. Using the button to increment a digit, the button to
decrement a digit, the button to move the cursor left,
and the button to move the cursor right, input the default or
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press ENTER and the following message appears (Figure 2-42)
with the default IP address of 192.168.0.1.
Figure 2-42 LCD Panel (LAN 1 IP Address)
4. Use the arrow keys as described in step 2 to input a new IP
address, then press ENTER. The following message appears
(Figure 2-43):
Figure 2-43 LCD Panel (Save Change)
5. Press ENTER. The LAN 1 IP address changes and the following
message appears (Figure 2-44 on page 2-55) with the default
subnet mask of 255.0.0.0.
Input Password:
0****
Input IP:
192.168.000.001
Save Change?
Yes, Save !!