FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

2
2-46
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Installation Tasks
The IP address is always xxx.xxx.xxx.xxx, the subnet mask is
always yyy.yyy.yyy.yyy, and the gateway address is always
zzz.zzz.zzz.zzz, where the octets xxx, yyy, and zzz are decimals
from zero through 255. If a network address is to remain
unchanged, type the current address in the respective field.
When the new network addresses are configured at the switch,
the message Request completed OK displays at the bottom of the
Sphereon 4500 - HyperTerminal window.
12. Select the Exit option from the File pull-down menu to close the
HyperTerminal application. A HyperTerminal message box
appears (Figure 2-29):
Figure 2-29 HyperTerminal Dialog Box (1)
13. Click Yes. A second HyperTerminal message box appears
(Figure 2-30):
Figure 2-30 HyperTerminal Dialog Box (2)
14. Click No to exit and close the HyperTerminal application.
15. Power off the maintenance terminal:
a. Click Start at the left side of the task bar and select the Shut
Down option. The Shut Down Windows dialog box appears.
b. At the Shut Down Windows dialog box, select the Shut down
option from the list box and click OK to power off the PC.