958-000283-003, March 2005)

Table Of Contents

Regulatory compliance and safety94

Grounding methods

There are several methods for grounding. Use one or more of the following methods when handling

or installing electrostatic-sensitive parts:

• Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis.

Wrist straps are flexible straps with a minimum of 1 megohm (±10 percent) resistance in the

ground cords. To provide proper ground, wear the strap snug against the skin.

• Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet

when standing on conductive floors or dissipating floor mats.

• Use conductive field service tools.

• Use a portable field service kit with a folding static-dissipating work mat.

If you do not have any of the suggested equipment for proper grounding, have an HP authorized

reseller install the part.

NOTE: For more information on static electricity, or assistance with product installation, contact

your HP authorized reseller.