FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Edge Switch 2/24 Installation Guide (AA-RTDWD-TE/958-000283-003, March 2005)
Table Of Contents
- Edge Switch 2/24 installation guide
- Contents
- Switch features
- Installing and configuring the Edge Switch 2/24
- Installation options
- Review installation requirements
- Unpack and Inspect the switch
- Install the Edge Switch on a desktop
- Install the Edge Switch in a rack
- Configure switch network information
- LAN-Connect the switch
- Configure the HAFM appliance
- Frequently used HAFM settings
- Set the switch online
- Set the switch offline
- Configure switch identification
- Configure switch operating parameters
- Configure fabric operating parameters
- Configure switch binding
- Configure SNMP trap message recipients
- Configure, enable, and test e-mail notification
- Configure and enable Ethernet events
- Configure call home event notification
- Configure threshold alerts
- Create new alerts
- Figure 25 Configure Threshold Alerts dialog box
- Figure 26 New Threshold Alerts dialog box-first screen
- Figure 27 New Threshold Alerts dialog box-second screen
- Figure 28 New Threshold Alerts dialog box-third screen
- Figure 29 New Threshold Alerts dialog box-summary screen
- Figure 30 Configure Threshold Alerts dialog box-alert activated
- Modify alerts
- Activate or deactivate alerts
- Delete alerts
- Create new alerts
- Configure SANtegrity authentication
- Back up HAFM configuration data
- Configure open systems management appliance
- Configure feature key
- Configure Open Trunking
- Enable Embedded Web Server
- Enable Telnet
- Connect cables to Fibre Channel ports
- Connect the switch to a fabric
- Unpack, inspect, and install the ethernet hub (optional)
- Using HAFM from a remote location
- Using the Embedded Web Server
- Manage firmware versions
- Regulatory compliance and safety
- Technical specifications
- Index
Manage firmware versions82
Modify a firmware version description
Use these steps to modify the description of an Edge Switch firmware version in the library stored on
the HAFM appliance hard drive:
1. At the HAFM appliance, open the HAFM application. The Products View page is displayed.
2. Double-click the icon representing the Edge Switch for which the firmware version description will
be modified. The Hardware View page for the selected Edge Switch is displayed.
3. Select Maintenance > Firmware Library. The Switch Firmware Library dialog box is displayed,
as shown in Figure 46.
4. Select the firmware version to be modified and click Modify. The Modify Firmware Description
dialog box is displayed, as shown in Figure 50.
Figure 50 Modify Firmware Description dialog box
5. Enter a modified description (up to 24 characters in length) for the firmware version and click
OK. HP recommends that the description include the installation date and text that uniquely
identifies the firmware version.
6. The new description for the firmware version is displayed in the Switch Firmware Library dialog
box.
7. Click Close.
Delete a firmware version
Use these steps to delete a firmware version from the library stored on the HAFM appliance hard
drive:
1. At the HAFM appliance, open the HAFM application. The Products View page is displayed.
2. Double-click the icon representing the Edge Switch from which the firmware version will be
deleted. The Hardware View page for the selected Edge Switch is displayed.
3. Select Maintenance > Firmware Library. The Switch Firmware Library dialog box is displayed, as
shown in Figure 46 on page 79.
4. Select the firmware version to be deleted and click Delete. A confirmation dialog box is
displayed.
5. Click OK. The selected firmware version is deleted from the Switch Firmware Library dialog box.
6. Click Close.