FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Edge Switch 2/24 Installation Guide (AA-RTDWD-TE/958-000283-003, March 2005)
Table Of Contents
- Edge Switch 2/24 installation guide
- Contents
- Switch features
- Installing and configuring the Edge Switch 2/24
- Installation options
- Review installation requirements
- Unpack and Inspect the switch
- Install the Edge Switch on a desktop
- Install the Edge Switch in a rack
- Configure switch network information
- LAN-Connect the switch
- Configure the HAFM appliance
- Frequently used HAFM settings
- Set the switch online
- Set the switch offline
- Configure switch identification
- Configure switch operating parameters
- Configure fabric operating parameters
- Configure switch binding
- Configure SNMP trap message recipients
- Configure, enable, and test e-mail notification
- Configure and enable Ethernet events
- Configure call home event notification
- Configure threshold alerts
- Create new alerts
- Figure 25 Configure Threshold Alerts dialog box
- Figure 26 New Threshold Alerts dialog box-first screen
- Figure 27 New Threshold Alerts dialog box-second screen
- Figure 28 New Threshold Alerts dialog box-third screen
- Figure 29 New Threshold Alerts dialog box-summary screen
- Figure 30 Configure Threshold Alerts dialog box-alert activated
- Modify alerts
- Activate or deactivate alerts
- Delete alerts
- Create new alerts
- Configure SANtegrity authentication
- Back up HAFM configuration data
- Configure open systems management appliance
- Configure feature key
- Configure Open Trunking
- Enable Embedded Web Server
- Enable Telnet
- Connect cables to Fibre Channel ports
- Connect the switch to a fabric
- Unpack, inspect, and install the ethernet hub (optional)
- Using HAFM from a remote location
- Using the Embedded Web Server
- Manage firmware versions
- Regulatory compliance and safety
- Technical specifications
- Index
Edge Switch 2/24 installation guide 105
replacing a power cord 93
reporting 20
rerouting delay, default value 47
reset configuration defaults 95
RFI/EMI connector hoods 89
routing delay, default value 96
S
SANtegrity Binding features 50
series number, regulatory compliance 89
serviceability 20
setting, online state 44
SFP transceivers 16
longwave 16
shortwave 16
slide rails, mounting 31
SNMP
authorization trap states, default value 96
communities, default value 96
configuring trap message recipients, EWS 76
configuring trap recipients 52
default values 96
trap messages 76
write authorizations, default value 96
software, diagnostic features 24
speeds, default value 96
static
electricity 93
static-dissipating work mat 94
static-safe containers
storing products 93
transporting products 93
static-sensitive devices 93
straps, ground
boot 94
heel 94
toe 94
subnet mask
configuring 34
default 95
Subscriber’s choice, HP 11
suppress RSCNs on zone set activations 47
switch
binding 50
connecting to a fabric 62
connectors and indicators 14
default speed value 96
firmware version 79
identification, configuring 70
installing in cabinet 33
LAN connecting 38
LEDs 15
maintenance port 18
management 18
CLI 20
EWS 18
HAFM 18
multiswitch fabric 23
network addresses 34
power supplies 17
principal, determining 49
priority 49
priority setting 50
setting date and time 42
SFP transceivers 16
unpacking and inspecting 28
switch parameters
domain RSCNs 47
insistent domain ID 46
NV-RAM storage 45, 48
preferred domain ID 46
rerouting delay 47
suppress RSCNs on zone set activations 47
symbols in text 10, 32
system
preventing electrostatic discharge to 93
T
Taiwan EPA battery recycling and disposal 93
technical support, HP 11
telephone numbers
FCC questions 88
telnet, enabling 61
text symbols 10, 32
toe straps, using 94
tools required 31
tools, conductive type 94
trap recipient IP addresses, default value 96
U
UDP port, default value 96
user rights, configuring, EWS 78