FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Edge Switch 2/24 Installation Guide (AA-RTDWD-TE/958-000283-003, March 2005)
Table Of Contents
- Edge Switch 2/24 installation guide
- Contents
- Switch features
- Installing and configuring the Edge Switch 2/24
- Installation options
- Review installation requirements
- Unpack and Inspect the switch
- Install the Edge Switch on a desktop
- Install the Edge Switch in a rack
- Configure switch network information
- LAN-Connect the switch
- Configure the HAFM appliance
- Frequently used HAFM settings
- Set the switch online
- Set the switch offline
- Configure switch identification
- Configure switch operating parameters
- Configure fabric operating parameters
- Configure switch binding
- Configure SNMP trap message recipients
- Configure, enable, and test e-mail notification
- Configure and enable Ethernet events
- Configure call home event notification
- Configure threshold alerts
- Create new alerts
- Figure 25 Configure Threshold Alerts dialog box
- Figure 26 New Threshold Alerts dialog box-first screen
- Figure 27 New Threshold Alerts dialog box-second screen
- Figure 28 New Threshold Alerts dialog box-third screen
- Figure 29 New Threshold Alerts dialog box-summary screen
- Figure 30 Configure Threshold Alerts dialog box-alert activated
- Modify alerts
- Activate or deactivate alerts
- Delete alerts
- Create new alerts
- Configure SANtegrity authentication
- Back up HAFM configuration data
- Configure open systems management appliance
- Configure feature key
- Configure Open Trunking
- Enable Embedded Web Server
- Enable Telnet
- Connect cables to Fibre Channel ports
- Connect the switch to a fabric
- Unpack, inspect, and install the ethernet hub (optional)
- Using HAFM from a remote location
- Using the Embedded Web Server
- Manage firmware versions
- Regulatory compliance and safety
- Technical specifications
- Index
Edge Switch 2/24 installation guide 103
ground strap specifications 94
grounding
methods 94
straps, wearing 94
suggested equipment for 94
H
HAFM
configuring switch 39
description 18
recording and verifying restoration information
39
remote location 64
remote location requirements 64
setting the switch offline 44
setting the switch online 44
HAFM appliance. See HAFM
hardware, mounting 30
heel straps, using 94
help, obtaining 11, 12
High Availability-Fabric Manager See HAFM
homogeneous fabric, interop mode 50
hop counts 47
HP
address for
FCC questions 88
authorized reseller 11
series number 89
storage web site 12
Subscriber’s choice web site 11
technical support 11
telephone number
FCC questions 88
I
identification, default values 95
IEC EMC, worldwide regulatory compliance notice
90
Initial Machine Load (IML) button 16
insistent domain ID 46
installation tasks
backing-up configuration data 60
cabling Fibre Channel ports 61
configuring
network addresses 34
switch to the HAFM application 39
LAN-connecting the switch 38
options 27
recording and verifying HAFM appliance
restoration information 39
setting switch date and time 42
setting up the HAFM appliance 39
unpacking and inspecting
switch 28
unpacking, inspecting, and installing
Ethernet hub 63
verify installation requirements 27
interop mode 50
homogeneous fabric 50
open fabric 1.0 50
interswitch link, description 13
IP address
configuring 34
default 95
default value 96
J
Japan
regulatory compliance notice 91
K
kits, optional 24
Korean, regulatory compliance notice 92
L
label, laser 90
LAN
connecting the switch 38
connector 15
laser
international certification and classification
information 89
product label 90
radiation, warning 89
regulatory compliance notice 89
LEDs
port 16
PWR LED 15
System Error LED 15
LIN alerts, default values 96
lithium battery 92