FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Edge Switch 2/24 Installation Guide (AA-RTDWD-TE/958-000283-003, March 2005)
Table Of Contents
- Edge Switch 2/24 installation guide
- Contents
- Switch features
- Installing and configuring the Edge Switch 2/24
- Installation options
- Review installation requirements
- Unpack and Inspect the switch
- Install the Edge Switch on a desktop
- Install the Edge Switch in a rack
- Configure switch network information
- LAN-Connect the switch
- Configure the HAFM appliance
- Frequently used HAFM settings
- Set the switch online
- Set the switch offline
- Configure switch identification
- Configure switch operating parameters
- Configure fabric operating parameters
- Configure switch binding
- Configure SNMP trap message recipients
- Configure, enable, and test e-mail notification
- Configure and enable Ethernet events
- Configure call home event notification
- Configure threshold alerts
- Create new alerts
- Figure 25 Configure Threshold Alerts dialog box
- Figure 26 New Threshold Alerts dialog box-first screen
- Figure 27 New Threshold Alerts dialog box-second screen
- Figure 28 New Threshold Alerts dialog box-third screen
- Figure 29 New Threshold Alerts dialog box-summary screen
- Figure 30 Configure Threshold Alerts dialog box-alert activated
- Modify alerts
- Activate or deactivate alerts
- Delete alerts
- Create new alerts
- Configure SANtegrity authentication
- Back up HAFM configuration data
- Configure open systems management appliance
- Configure feature key
- Configure Open Trunking
- Enable Embedded Web Server
- Enable Telnet
- Connect cables to Fibre Channel ports
- Connect the switch to a fabric
- Unpack, inspect, and install the ethernet hub (optional)
- Using HAFM from a remote location
- Using the Embedded Web Server
- Manage firmware versions
- Regulatory compliance and safety
- Technical specifications
- Index
102
E
e_d_tov 49
default value 96
fabric segmentation 49
less than r_a_tov 49
multiswitch fabrics 49
rerouting delay 47
E_Ports
description 13
segmentation, preferred domain ID 46
electrostatic damage prevention 93
electrostatic discharge. See ESD
Element Manager, description 18
e-mail notification, configuring 53
embedded web server. See EWS
enabling
EWS 61
telnet 61
error detection 20
ESD (electrostatic discharge)
obtaining additional information 94
precautions 93
prevention measures 93
storing products 93
transporting products 93
types of damage from 93
Ethernet
events, configure at HAFM appliance 54
events, enable at HAFM appliance 54
hub, unpacking, inspecting, and installing 63
European Union, regulatory compliance
notice 90
EWS
configuring
date and time 71
network information 74
SNMP trap message recipients 76
switch ports 68
user rights 78
defined 18
enabling 61
F
F_Port, description 13
fabric parameters
e_d_tov 49
interop mode 50
r_a_tov 49
switch priority 49
fabric segmentation
e_d_tov 49
preferred domain ID 46
fabric, connecting switches to 62
factory defaults 95
FCC (Federal Communications Commission)
Class A Equipment, compliance notice 88
Class B Equipment, compliance notice 88
declaration of conformity 88
modifications 88
notice 87
Federal Communications Commission. See FCC
Fibre Channel
addresses 46
ports 16
firmware
adding version 80
deleting version 82
determining version 79
downloading 83
modifying description 82
release notes 80
FL_Port, description 13
floor mats, dissipating 94
frames, routing of 47
front panel features 14
FRUs
power supplies 17
SFP transceivers 16
G
gateway address
configuring 34
default 95
German noise declaration 92