FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks Edge Switch Release Notes

Known Issues
19Edge Switch Release Notes
Workaround
Remove the unauthorized device, change the Port Binding WWN (if this device
should be authorized), or alternatively disable Port Binding.
CTP Events for Edge Switch 2/24 Show Incorrect FRU Number
Should a CTP event occur in an Edge Switch 2/24, the event log may show
“CTP-24” instead of “CTP-0”. There is only one CTP in the Edge Switch 2/24, so
there should be no question as to what FRU is exhibiting the event.
HSG80 Transparent Mode Not Supported with IBM AIX
Use of an HSG80 with IBM AIX is restricted to operating the HSG80 in Multibus
mode with the Edge Switch 2/24 and Edge Switch 2/32. Transparent mode is not
supported at this time.
Workaround
None.
HSG80 Transparent Mode Not Recommended with Controller in SCSI-3
Mode with HP-UX Operating Systems
Due to an issue with non-existent duplicate LUNs being displayed with the
HP-UX operating systems, the HSG80 controller is restricted to SCSI-2 mode of
operation when set to Transparent failover mode. SCSI-3 mode of operation in
Multibus failover mode is fully supported with the use of Secure Path software,
Version 3.0 or later versions.
Workaround
None.