FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
72 HA-Fabric Manager Server Installation Guide
Test Remote Notification
If e-mail event notification or one of the call-home notification features are
enabled, set up the HAFM application to test these remote notification features.
Because the features are configured at the HAFM application, call-home and
e-mail event notification are enabled for multiple Directors and Edge Switches.
Note: Prior to testing remote notification, complete the steps in the previous sections:
■ Configure the Call-Home via Dial-Out Feature on page 58
■ Configure Proactive Services Call Home via LAN Feature on page 67
■ Configure E-Mail Event Notification on page 69
To test remote notification:
1. Enable call-home event notification through the HAFM server.
a. In the Products or Fabrics View page, choose Maintenance >
Configure Call Home Event Notification.
b. The HAFM Configure Call Home Event Notification dialog box
displays.
— If a check mark displays in the check box, call-home is enabled.
— If a check mark does not display in the check box, click the box to add
a check mark.
2. Open the Products View page. Choose Maintenance > Test Remote
Notification. The Test Remote Notification dialog box displays, as shown in
Figure 68.
Figure 68: Test Remote Notification dialog box
3. Check the Call Home and E-Mail check boxes, depending on which features
you want to test.