FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
68 HA-Fabric Manager Server Installation Guide
You should only need to enter an IP address for CSGIpAddress, unless
default values were changed on the HP Services Gateway.
b. CSGPort—The port that data is sent to on the HP Services Gateway. By
default, the value is set at 2069.
c. CSGExePath—The executable path that is configured in conjunction
with CSGIpAddress and CSGPort. By default, the path is set to
/ms/eventAsync.
4. If you have changed the contents of the rns.properties file, reboot the HAFM
server.
Note: Rebooting the HAFM server does not adversely effect the operation of
Directors, Edge Switches, or the fabric.
Enable Call-Home via LAN
The HAFM server is now configured to automatically call-home through the LAN
connection to a service support facility to report Director, Edge Switch, or HAFM
server problems.
You must now enable the call-home feature on the HAFM server itself as well as
each Director and Edge Switch through the HAFM application on the HAFM
server.
To enable the call-home feature on the HAFM server:
1. Log in to HAFM (see “Access the HAFM Server Desktop” on page 38).
The HAFM main window displays, as shown in Figure 64.
2. Select Maintenance > Configure Call Home Event Notification.
The HAFM: Configure Call Home Event Notification dialog box displays,
as shown in Figure 65.
3. Place a check mark in the Enable Call Home Event Notification option.
This enables the call home function for the HAFM server as well as for all
Directors and Edge Switches that have also been enabled for call-home
notification.