FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
67HA-Fabric Manager Server Installation Guide
Configure Proactive Services Call Home via LAN Feature
The HAFM server call-home via LAN feature provides automatic event
notification to a support center for reporting Director or Edge Switch problems. In
order to report events, this feature requires the HAFM server to have a valid LAN
connection to a SANWorks Management Appliance or other server running the
HP Proactive Services software.
Note: To order Proactive Services software, contact your HP customer service
representative.
Configure Call-Home via LAN on the HAFM Server
Use these steps to configure call-home on the HAFM server.
1. Verify that the HAFM server is connected to a LAN with access to the server
running the HP Proactive Services software.
2. Locate the rns.properties file in the following location:
c:\Program Files\HAFM
Following is an example of file contents:
RnsDataDir=c:\HAFMData\RnsData
RnsEventDir=c:\HAFMData\RnsData
RnsLogDir=c:\HAFMData\Rnsdata
CSGIpAddress=
CSGPort=2069
CSGExePath=/ms/eventAsync
3. Using any ASCII text editor, make the following changes to the
rns.properties file:
a. CSGIpAddress—Enter the IP address of the HP Services Gateway in
appropriate format (xxx.xxx.xxx.xxx).
Note: No IP address is shown in the rns.properties file if this is the first time this is
configured.