FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
65HA-Fabric Manager Server Installation Guide
Configure Identification Information for Directors and Edge Switches
This procedure describes how to configure identification information for each
Director and Edge Switch that is managed by the HAFM server.
Repeat this procedure for each Director or Edge Switch you want to configure for
call-home event notification.
Note: In order for Directors and Edge Switches to be managed by the HAFM server,
you must first add them using the HAFM application. Refer to the appropriate
installation guide for your Director or Edge Switch for more information.
Complete the following steps for each Director or Edge Switch managed using
HAFM:
1. From the HAFM main window, double-click on the icon for the device.
The Hardware View for the device is displayed.
2. On the menu bar, select Configure >Identification. The Configure
Identification dialog box displays, as shown in Figure 66.
Figure 66: Configure Identification dialog box