FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
38 HA-Fabric Manager Server Installation Guide
Configure HAFM Server Information
Configure the computer name and workgroup name for the HAFM server.
Configure these parameters from the server’s Windows 2000 operating system,
using a LAN-attached PC with standard web browser.
If required, change the HAFM server’s gateway addresses and domain name
system (DNS) server IP addresses to conform to the customer’s LAN addressing
scheme. The gateway addresses are the addresses of the local router for the
corporate intranet.
Access the HAFM Server Desktop
To log in and access the HAFM server desktop:
1. Ensure the HAFM server and a browser-capable PC are connected through an
Ethernet LAN segment. At the PC, launch the browser application (Netscape
Navigator
or Internet Explorer).
2. At the PC browser, enter the IP address of the HAFM server for the HAFM
LAN to which the PC is connected (LAN 1 or LAN 2), followed by :5800, as
the Internet uniform resource locator (URL). Enter the URL in the following
format:
http://xxx.xxx.xxx.xxx:5800
Where xxx.xxx.xxx.xxx is the default IP address or the IP address configured
while performing Configure HAFM Server Password and Network Addresses
on page 26. The VNC Authentication screen displays (Figure 38).
Figure 38: VNC Authentication screen
3. Type the default password and click OK. The Welcome to Windows dialog
box displays.