FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
35HA-Fabric Manager Server Installation Guide
Manually Configure Private LAN Addresses
To manually configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the HAFM server’s LCD panel, press ENTER. The Welcome!! or
operational information message changes to the following (Figure 28):
Figure 28: LCD panel (password entry)
2. Using the button to increment a digit, the button to decrement a digit, the
button to move the cursor left, and the button to move the cursor right,
input the default or changed password, and press ENTER. The LAN 2
Setting?? message displays at the LCD panel.
3. Press ENTER and the following message displays (Figure 29) to allow the
selection of DHCP.
Figure 29: LCD panel (DHCP selection)
4. Press ENTER to select the default (NO). The the following message displays
(Figure 30) with the default IP address of 10.1.1.1.
Figure 30: LCD panel (LAN 2 IP address)
5. Use the arrow keys as described in step 2 to input a new IP address, then press
ENTER. The following message displays (Figure 31):
Figure 31: LCD panel (save change)
Input Password:
0****
Use DHCP?
NO!
Input IP:
10.001.001.001
Save Change?
Yes, Save !!