FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
30 HA-Fabric Manager Server Installation Guide
Manually Configure Public LAN Addresses
To manually configure TCP/IP network information for the public LAN
connection (LAN 1):
1. At the HAFM server’s LCD panel, press ENTER. The Welcome!! or
operational information message changes to the following (Figure 13):
Figure 13: LCD panel (password entry)
2. Using the button to increment a digit, the button to decrement a digit, the
button to move the cursor left, and the button to move the cursor right,
input the default or changed password, and press ENTER. The LAN 1
Setting?? message displays at the LCD panel.
3. Press ENTER and the following message displays (Figure 14) to allow the
selection of DHCP.
Figure 14: LCD panel (DHCP selection)
4. Press ENTER to select the default (NO). The the following message displays
(Figure 15) with the default IP address of 192.168.0.1.
Figure 15: LCD panel (LAN 1 IP address)
5. Use the arrow keys as described in step 2 to input a new IP address, then press
ENTER. The following message displays (Figure 16):
Figure 16: LCD panel (save change)
Input Password:
0****
Use DHCP?
NO!
Input IP:
192.168.000.001
Save Change?
Yes, Save !!