FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Initial Setup
22 HA-Fabric Manager Server Installation Guide
Connect the HAFM Server
You can connect the HAFM server to the single customer-supplied corporate
Ethernet LAN, with or without an HP-supplied Ethernet hub. This allows
remote sessions to the HAFM server from anywhere on the corporate LAN,
provides access to manage the Directors and Edge Switches on this LAN, and
allows access to applications such as HP OpenView Storage Area Manager.
Optionally, you can configure a separate dedicated private LAN between the
HAFM server, and the Directors and Edge Switches that it manages.
Note: The dedicated private LAN precludes the use of the HP OpenView Storage
Area Manager
application.
Before connecting the HAFM server, ensure that it is positioned in its final
installation location on a table or desktop, or installed in an equipment
cabinet, as described in “Rack Mount Instructions” on page 89.
1. Connect the HAFM server to the customer’s corporate intranet (public LAN
interface). To connect the HAFM server:
a. As shown in Figure 3, connect one end of a customer-supplied Ethernet
patch cable to the left RJ-45 adapter (LAN 1) at the rear of the server.
b. Connect the remaining end of the Ethernet cable to the corporate intranet
as directed by the customer’s network administrator.
Figure 3: 1U HAFM server connections