FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

HAFM Server Diagnostics
129HA-Fabric Manager Server Installation Guide
d. Ignore the message. After ten seconds, the server performs the boot
sequence from the basic input/output system (BIOS). During the boot
sequence, the server performs additional POSTs and displays the
following operational information at the LCD panel:
—Host name.
— System date and time.
— LAN 1 and LAN 2 IP addresses.
— Central processing unit (CPU) temperature.
— Hard disk capacity.
— Virtual and physical memory capacity.
4. After successful POST completion, the LCD panel displays a Welcome!!
message, then continuously cycles through and displays server operational
information.
Did POSTs detect a problem?
NO YES
↓ A computer hardware problem exists. Refer to the supporting
documentation shipped with the server for instructions on resolving
the problem. Exit MAP.
4
After rebooting the server at the LCD panel, log on to the HAFM server’s
Windows 2000 desktop through a LAN connection to a browser-capable PC.
Refer to “Access the HAFM Server Desktop” on page 38 for instructions.The
HAFM Management Services and HAFM applications start and the HAFM Login
dialog box displays.
Did the HAFM Login dialog box display?
NO YES
↓ The HAFM server appears operational. Exit MAP.
Additional analysis for the failure is not described in this MAP. Contact the next
level of support. Exit MAP.